Jump to:

1. Understand Where Users Spend Time on your Site

2. Use LOTS of Placeholders

3. Use Placeholders of Every Position Type

4. Select Multiple Ad Sizes

5. Placeholders above the Fold

6. Enable Mobile Anchor Ads

7. Mobile Placeholders

8. Use a Range of Placeholder Types

9. Be Patient

10. Deleting placeholders


Ezoic Ad Tester is a very powerful tool that can drastically increase your ad revenue from your site.  It is capable of testing millions of combinations of ad locations, colors and sizes with minimal work on your part.  However, there are a few basic things you should do to make sure you get the most out of the Ezoic Ad Tester. 

 

1. Understand Where Users Spend Time on your Site


To best optimise your site with Ezoic for monetization, it's necessary to spend some time finding out about a typical user journey. You can find your top landing pages on Google Analytics by going to Behavior > Site Content > Landing Pages:



You should then check your placeholder setup on these top landing pages by device. You can also do this under Content > Landing Pages at Ezoic once there is data in our Big data Analytics showing up. You can find this under the "Analytics" tab in your dashboard. This article shows you how to navigate Big Data Analytics


2. Use LOTS of Placeholders


Insert as many placeholders as you possibly can where there is the content to Support it. Depending on content length, most publishers see best results with at least 15 placeholders per page. Obviously the system will not show an ad in every placeholder - it all depends on the preference of each individual user - here is more information on how they work. Think of a placeholder as a place where an ad can potentially go, rather than a normal ad tag. 

 

We encourage you to enable placeholders to auto-detect "similar pages" within the Ad Tester Chrome Extension, (which you can download from the Chrome Web Store) and that you then deactivate the extension and browse landing pages with a different layout or setup to check these placeholders have translated across in the correct positions. If, when you have first inserted the placeholder, you find it does not translate across correctly, try removing certain sizes or aligning the placeholder differently with the Chrome Extension:

 


3. Use Placeholders of Every Position Type


You should insert a placeholder of every position type on each of your pages where there is the content to support it. These should go in the following descending order down the page: top of page, under page title, under first paragraph, under second paragraph, bottom of page, in-content 1, in-content 2 etc. You should also add top of page sidebar, mid sidebar, and sidebar bottom where applicable. In the Chrome Extension, each 'Position Type' is shown as a different colored placeholder - which can be useful when you are checking!

 


Below is an example of how they will then appear when listed in the Ad Tester app in your dashboard.


4. Select Multiple Ad Sizes


Try to select as many ad sizes as will fit in each Ad Placeholder location. The system will find the best ones for each scenario and sometimes the results will surprise you! Below is how to select the sizes when adding placeholders manually in the app in your dashboard.



We recommend using the Ad Tester Chrome Extension to add placeholders (rather than doing this manually within the Ad Tester app) as it's super easy and quick to use. Here's some more info on how to use the chrome extension.

 

Below is how to select sizes within the Ad Tester Chrome Extension:

 


5. Placeholders above the Fold


Depending upon your layout and what content you have at the top of your pages, be careful with Top of Page and Under Page Title placeholders so that you don't enable sizes such as netboard which could push content below the fold.


6. Enable Mobile Anchor Ads


Anchor ads are ads that "stick" to the bottom of devices even when the visitor scrolls down the page. They can provide a great user experience and can significantly increase your revenue from mobile devices. Enable these by device type clicking on the Ad Tester app in your dashboard under "Monetization" and toggling the sliding controller.

 


You can customise where anchor ads show by sub domain, page, and directory under the "additional settings" area.

 

7. Mobile Placeholders


Odds are that many people are visiting your website on mobile devices. Make sure you have mobile enabled for a good spread of placeholder locations and that mobile sizes are enabled.

Here's how to do this with the chrome extension:



Where the mobile icon is green, this means this size is enabled for this placeholder on mobile:



You can review the setup using the Chrome extension by activating the extension and then using the Chrome Developer tool (or f12) to show the mobile version of the site.

 

8. Use a Range of Placeholder Types


Native ads and link units can work well on some websites. We recommend creating and placing 1-2 native placeholders on each page. Doing this can increase your revenue by 10 - 25% depending on your site.


Simply activate the Chrome Extension under "Create" and click the drop down menu where it says "Automatically Detect" and select "Native" or "Link" then click "Select Location". Here's how to do this with the chrome extension:



9. Be Patient


Testing thousands or millions of ad combinations takes time. Don't fret about about daily fluctuation. Testing requires long term commitment and patience, but the benefits are often astronomical. Depending on your site's size, we recommend giving testing at least 3-6 months to see the full benefits.


10. Deleting placeholders


Try not to delete placeholders after adding them as they system will have already started collecting data about your individual users and generating revenue from different ad combinations. It would be like removing a playing card from a pack - you don't know for who and in what situation this card would have proved valuable.